Seat Unit

crank.....? is there a book that the movie 'crank' originated from...or is that book [by ellen hopkins] the only crank??

How do you remove bicycle crank for a trampoline bike? The crank is were the petals are connected to the frame. My bike is a simple cheap bike. It does not have gears. I must remove the crank and pedals so i have just the frame for a perfect trampoline bike.

How does an umbrella crank work? I am working on an umbrella re-design for a project at school and I need to know exactly how an umbrella crank works. Pictures could be helpful.

How do I know which crank arm puller I need? I am fixing up some bikes for low income kids in the neighborhood and need to pull the crank out of one. It's a cheap Chinese made Huffy mountain bike and I can't find any information on what type of puller I need. It looks to have a square shaft with threads in the crank arm where a puller would screw in. Is there a puller that works on a majority of these cheap bike cranks so I can get the most use out of it? Thanks for your help.

What are the benefits to a crank machine rather than a drop-weight machine? Are crank machines just faster? Are they more accurate? Can drop-weight machines reach 100% tension accuracy when used correctly? Can someone suggest a drop-weight machine for under 300 dollars to me?

Where can I find replacement window crank stems for my house windows? I am buying a house with the older wooden crank out windows. The previous owner removed all the handles AND the stems that they fit on. I can find all kinds of handles online, but they are all female, they don't come with the stems. can anyone help me find the stems or handles that come with stems?

How do I find out the proper crank arm lenght for my bicycle? Bicycle crank arms come in sizes from 165mm to 185mm, how do I determine the right size for me?

How do I get the crank bearings out of my Blaster? I have split the case, and removed the crankshaft and bearing seals. I want to replace the the crank Bearings. What is the best way to to get them out with out damaging the case? Also, when it is time to install the new crank do I need to use the Yamaha Installing pot tool? I can't find this tool anywhere.

How much would it cost to turn the crank? I've got a '95 Grand Am with a rod knocking, but still runs. Rather than replace the whole engine, I'd like to just re-machine the crank and replace the bearings because the rest is still in very good condition. What kind of cost would I be looking at? I'm doing the work, other than the machining. So any costs you give me need not include labor charges. 4 cylinder by the way.

Jeep Grand Cherokee will once in a while crank but not start? I have a 98 Grand Cherokee 5.2. A few times over the summer and a few times last week it will crank but not start on its own. After a long time of trying I can get it to stay running by keeping my foot on the gas a little bit after letting go of the key. The diagnostic system is fine, so it's nothing that should trip a warning light on the dash, and it's never stalled once running.

How do you remove the armature from the crank on a generator? I am planning the replace a con-rod in a gas generator. The armature for the generator appears to be pressed onto the crank. How can I remove it without damaging it? (Tecumseh 8HP motor)

How do you make ice cream with hand crank maker? I got a hand crank Ice Cream Maker for my anniversary. I would love to make home made ice cream and need a recipe. What I'm supposed to do with this recipe would be good too. I've never made home made ice cream and would love to try it. I would have read the instuction book if it came with one!

What is the max you can crank aftermarket torsion keys before it effects your ball joints ect? my truck is a 99 gmc 1500 z71. The torsion keys say you can crank them 1-3" and still have factory ride but I heard that is bs. If I crank them 3" will that wear out my front end quick?

What is the crank center in a Cadillac CTS? My car stalled this morning and would not start again. The dealership says that I need a new crank center.

How can I fix a crank shaft and flywheel? My woodruff key got mangled and dished out the end of the crank shaft where it seats. It also wore down the inside of the flywheel channel. Is there a way to fix them? Can I have someone build up the dished out areas with some weld?

What are ways to install a windowless ac when you have a crank out window? The window kits that comes with windowless acs are often for vertical sliding windows. But how would one go about installing a ac when they have a crank out window?

What fluid goes in the upper crank case of a motorcycle? I have a 2000 Yamaha yzf 600r. The bike fell over and all the fluids came out of the upper crank case. What fluid do I put back in there? Is it just oil, or something else? All help is appreciated! Yes, the cover cracked and fluid leaked out. The upper right side.

How do you remove the window crank on a 92 Lumina? I looked to see if there was a spring clip to remove but I couldn't feel or see any. I tried to snag the clip with a piece of cloth if there was one there. The handle appears to be pressed on but does not want to come off. Is there a clip? Does it require a special tool? I need to get the window crank off to remove the door panel to replace the outside door handle.

How do I take apart the crank on my bicycle? Im not very bike savvy(obviously), but it LOOKS like it has a 2 piece crank. Also, i cant figure out how to get the chain off either. Its kind of old and rusty, so things may just be stuck, but i got one pedal off and the other just wont move. HELP!

Can I start my engine to test my new timing belt ,without the crank pulley damper? I want to make sure that my car idles correctly after replacing the timing belt, the crank pulley damper is in the way and it would make it a lot easier if I keep it off until I see it idles correctly. Thank you very much.

Is there a way to fix the crank part on the casement windows in my house? I have the kind of windows that crank open, but on almost half of them the crank is breaking and won't shut the windows. It will open them, but shutting the windows involves pulling the screen off and manually pulling the window shut. Is there an easy fix for this, or a way to buy and install new cranks? My landlord won't replace the windows. Thanks!

What could cause the front end of a car to shake when trying to crank it? This is an old 86 model Dodge Omni.It runs great when it warms up but hesitates and the front end shakes when I try to crank it.The carburator is in need of an overhaul but it still works ok.I'm thinking it might be the motor mount but don't know a lot about cars. This just started a couple of weeks ago but I haven't had time to have it checked yet. Thanks for your info.

What is the easiest way to remove a crank sensor magnet that is stuck in the crank? I had to replace my ingition module AND my crank sensor now when I pulled my sensor out the magnet was broken off and is still in the crank...whats the easiest way to remove it without causing damage to the engine or electrical componets?? The car is a 1991 Chevy Beretta 3.1ltr V6

How can I remove a stripped crank bolt? I need to remove my crank bolt on my BMX bike and it has been stripped from previous attempts. How can I remove this without needing to buy a new crank?

How do you make a hand-crank electricity generator like we used to use in school? A bell rang when it cranked. I think you use a magnet wrapped with copper wire or something, but when you crank it, it produces an electrical current. I just need to know what it is called so I can see about making one for myself.

Why is my 1997 mazda millenia s crank overs but wont start sometimes? Is my crank shaft sensor bad or what should i do it will do fine and then sometimes it will crank and not start at all. What should I do?

Will a egr valve cause a car not to crank after car is warmed up, but to crank after the car has cooled off? My car will crank after it has sat over night or for a few hours, but if car has been drivin then shut off, it will not crank until it has sat for a few hours. Why is this, and what would be the cause? I have a 95 Camaro. Thanks.

A very close friend is very addicted to speed aka crank. How can I step in this situation? A very close friend is very addicted to speed aka crank. How can I step in this situation? I work near Batesburg, South Carolina. What city or town or non-profit or private organizations would help me do what's right?

how do i change a crank position sensor in a 98 jetta gt? I have a 98 VW jetta gt. it skips while in low rpm's. After 2000 its fine. I have been told this is the crank position sensor. If anyone has any other suggestions i would appreciate them. thanks.

how do i get a spanish crank out of a spanish bottom bracket? i have a frame that has nothing on it accept for the crank, that is the only thing on it! does anyone know how to get it out?

My crank on my bike keeps getting loose all the time? How do I keep it tight? The left side of bike, The crank without the chain rings. It keeps getting loose all the time. I tighten it with my allen key, the bolt. Then its really really tight, but still comes loose when riding? any suggestions?

How do I get the bit the crank connects to of a mark 2 raleigh chopper? Got a chopper I am restoring but I cant seem to get crank or the bit it connects to of the frame. Can anyone help tutorials welcome

What product can I use to secure a crank bedroom window so that it is childproof? I've found lots of locks for double hung and sliding indows, but nothing for a crank window. Any suugestions before my 2 year old ends up in the front lawn?

how do i detach the crank from the sprocket on my schwinn stingray? i need to know how to detach the crank from the sprocket. i got the crank and sprocket off but they wont detach from each other. so how do i detach them?

How can i reset the crank sensor on 1997 Mercury Villager? I have no spark coming from the ignition coil. I checked the coil and thats fine. Now I am thinking that it has to be the crank sensor because I already checked everything else. HELP! How to reset crank position sensor?

How much should i be charged for a Crank Pulley fitting? My Crank Pulley has come off and i have taken it to a garage for fitting. Just wondered what to expect to pay all in?? Its a 53 plate Vauxhall Vectra

How can I check the crank shaft sensor? I have narrowed down my shuting off problem to the crank sensor. I would like to check it first before changing it. It has 3 wires coming from it. What votage am I looking for across the wires. If I am correct, 1-ground, 1-possitive, 1-send signal back to computer.

Is there a special tool to install a window crank on a 1971 Chevelle? We have the window crank and the clips but how do you put them on? Is there a special tool?

What caruses a 4.3 volvo penta boat crank case to fill with water? The engine runs fine. It is not missing like it would have water in a cylinder, but fill crank case quickly with water.

Has anyone ever heard of a vehicle trying to crank by itself? Has anyone ever heard of a vehicle trying to crank by itself? Please help! Two starters have already burned up. The only way I can get it to stop is to pull the relay which has also been replaced. Is my truck possessed? Please help! Two starters have already burned up. The only way I can get it to stop is to pull the relay which has also been replaced. Is my truck possessed? My truck is a 2002 Chevy Suburban. It has been in the shop but they cannot figure out the problem. I am at wits end and cannot afford to trade at this time.

Will a crank charging flashlight still work after an EMP or nuclear strike? I have this little LED flashlight/ radio combo gadget that you recharge by turning a crank on it. Will I still be able to crank it up and work it after and EMP or Nuke strike? Its a DuraPro Selfpowered Flashlight. Its a DuraPro Selfpowered Flashlight.

How remove epoxy adhesive? and wich one is the best for a oil crank cover? ok, I have a problem I have been dealing with a crack in the oil crank of my car and I fixed with epoxy adhesive, but the epoxy cracked (it worked for 3 years!!!) but I forgot wich one I used that time, so if you recomend one that would be great!! also, by the way, does someone knows how to remove the epoxy (cracked one)? I tried but it kind of hard! and I don't want to put the new one over the old one. Note: I would love to change the oil crank but it is almost impossible I have to disconect and lift the whole motor of the car to be able to do that!!! Thanks a lot.

How do I fit a new crank to my bicycle? I managed to remove the old one using a combination of a crank extractor and a hacksaw, but I can't get the new one to go on. This bicycle is (I believe) from 1965, and I was wondering if perhaps the standard for cranks was slightly different. The one I bought seems to be about one milimetre too small. Could I file down the shaft to fit it? Or does anyone have a better idea? Could I use a mallet?

Where can i find a video tutorial to split a EJ20t subaru engine block to remove crank shaft? I have pulled out my ej20t engine block and i want to know how to seperate the 2 halves so i can repolace the crank shaft. So im looking a video tutorial or some really good instructions on how to do this. Cheers.

No signal from crank sensor mitsubishi eclipse? 1995 eclipse with a 420A engine and a 5 speed. I have no signal from my crank sensor. I have power, correct power on the signal wire and a good ground. I replaced the crank sensor and still have no signal form the sensor. What could be wrong?

1984 pntiac 6000 2.8L engine how do you line up the cam and crank timing marks and the distributor? I need to know how to line up the timing marks on the cam and crank gears on the 2.8L in my 84 pont 6000 where do the marks need to be positioned and the distributor rotor what postition will it be in when the cam and crank are properly aligned?

I have a 1998 nissan quest. I need to know where the crank sensor is located? I own a 1998 nissan quest. I need to replace my crank sensor but we are having trouble locating it. If anyone can help me I will be very greatful.

How do you remove the crank on a Chevrolet S-10 Door Panel? I need to remove the door panel to fix the window in my S-10 pickup 1991, but I cant get the crank off to remove the panel any suggestions?

Do i need a special tool to remove the old cotter crank from my bicycle or will some basic tools work? im not concerned with damaging the crank, i just want to remove and replace it. Thanks.

Why would I have to remove one of the fuel injectors on a 1999 nissan altima before it will crank? If I leave all the injectors in the car floods out. And if I take one out the car will crank. I put in a new pump and one of the old gas lines from the old pump was melted. Is the return line stopped up? Do I have to blow the return line out or the injectors?

Why does my dog turn into a raving psycho dog whenever I crank the lawnmower? Whenever I start to crank the lawnmower or the engine is running she will bite down on the front wheel of the push mower and drag it across the yard, even if I try to steer it straight. It's like she's pumped up on adrenaline. She's only 55 lbs but she's a bull terrier/boxer dog if that helps. I asked her why she does this but she won't tell me in a form I can understand. Any ideas?