Seat Unit

What kind of oil to use on a squeaky wood chair? I just bought a beautiful gently used wood rocker but it squeaks. What is the best oil to use for a good piece of wood furniture? I have olive oil, coconut oil, peanut oil, grapeseed oil, castor oil and mineral oil already on hand. Will any of these work without doing harm to the wood? I'd prefer a natural and inexpensive solution.

How to stain and protect an outside wood chair? What do I need to use to protect the chair from rain and snow? Thank you.

How can I restore an old wood chair without stripping the finish.? It is in pretty good shape except for a few places where the finish has become gummy.

Is there any way to remove hair dye from a wood chair? Daughters!

What glue should I use to re-attach Legs to sofa Chair. The legs and the bottom of chair are wood.? 2 legs on my sofa chair have loosened and become detched. I can no longer screw them in. I tried crazy glue but it did not hold. The legs are wood with a spiraled metal coming out the top that is meant to screw into the bottom of the chair. The legs are wood. The bottom of the chair is wood. How can I re-attached them?

Need to find parts for a wood baby high chair? I have a wood baby hight chair I need to find the parts the hold the try on they are like a snip under the tray

Base and window trim are wood, should chair rail be wood or painted? The area below the rail will be a sage green, above a beige, should I match the trim to the exiting trim, or to one of the colors? Or could I just paint it white to stand out more, and it would match doors and blinds and appliances in kitchen?

Repairing fabric on chair cushions, how do you get staples out of wood? I'm trying to get the old fabric off my chair cushions and there are hundreds of staples in the wood on the the bottom of the chair. How do you get the staples out of the wood? Some of the staples are flush tight and it's hard to pry anything under them. After much blood and many cuss words, I need some advice. Is there a tool for this?

What kind of wood should I use to make a chair? I need to make a chair from scratch for school I was wondering what type of wood would last, look nice and is easy to deal with.

I have a wood chair that has gold metal caps on ends of arms. any idea where to get replacements for these? The caps cover the end of the arm and are held on with an upholstery tac.

is there a portable tray made for the standard wood high chair that are used in restaurants? i would love to know where to get one

How do I upholster a chair back with wood trim? The back of the chair is now a type of ratan stuff. I want to remove that and put a back with padding and tapestry on it. I can't take it apart, theres nothing there but whicker type sticks that you can see through

How do you remove wallpaper primer from wood surfaces--cabinets, chair rails? I was hoping to find a product or technique that would not destruct the existing wood surface on the counters and woodwork

Old, wood, carved rocking chair - turns into high chair? I have a very small child size rocking chair that has been in my family for quite some time. It's in wonderful condition and it turns into a rocking chair when extended upward. Is there any thing out there similar so that I can get some information on origin and where it came from etc? I have no other info on it and I don't want to try to find the "Antique Road Show"

How do I whitewash/paint an antique table & chair set made of wood? I've seen many ways- paint, stain... sanded/non sanded- which is the best way to get the whitewash antiqued look? I still want some natural wood to show through.

I accidentally broke my friends chair reclining lever...What can I use to fix plastic wood material...? It's the little lever thing on the right side that you pull and the footstool of the chair pops up. And I accidentally was pulling it and it just snapped off and she was pretty mad, but the material is like plastic but looks like wood...so I guess it's just plastic...but what should I do to try to re-attach it?

We just had laminate wood floors installed...can we have a leather office chair that rolls directly on it? We have these floors in the office of our home. We had carpet in there and had one of those thick plastic mats on the carpet so you could actually roll the chair over the carpet. That particular mat has hard pegs of plastic covering the backside so it will dig into the carpet and stay put. We obviously can't use that on out new floors. My question...will the wheels of the office chair damage the new flooring? Should I put something down to protect them? If so, do they make a mat with NO hard pegs on the back...one esp made for wood floors?

About how much does it cost to furniture strip a chair to bare wood?

What type of wood should I use to build a chair or stool? As a project i have to built something to seat. I can't use nails or screws. What type of wood is typical for this kind of projects? I dont plan to use oak. I need something cheaper.

How do I clean and touch up the wood chairs? I just purchased wood chairs from a chinese restraunant that have polyurethane and soy sauce on them. I already used pine sol and a scrubie sponge. It took most of the grime off, but they are still sticky. Should I continue or should I stop and use something else? I just want to make sure I'm not damaging the wood before I get a chance to enjoy them.

Why do we sit on hard wood chairs in the dining room? Why do we sit on hard wood chairs in the dining room, but our patio furniture is padded? We sit outside for a barbecue, so it's not because we're eating. For that matter, even some toilet seats are padded.

a carpenter is making a brace for a chair. to do so she intersects two pieces of wood to make two sets of vert a carpenter is making a brace for a chair. to do so she intersects two pieces of wood to make two sets of vertical angles. the obtuse angles formed are each 145. what is the measurement of each acute angle formed?

plaid couch & loveseat is maroon cream navy blue yellow w wood legs & a very yellow chair need wall color Help? It's a single wide trailer with 2 wall mirrors and wood trim. the kitchen has a blue countertop with wood cabinets. i want to paint the kitchen light blue so what will not clash with that?

Does anybody know who made this chair? I have a picture of it. Leather chair with drapped curved wood arms? It is the tall back office chair. It was sitting in my grandfather's basement for about 20 + years would be my guess. The arms are drapped and curved over the front of the chair. I just need to know if someone knows of a website I can go too to see if they have anything like that chair. Someone said that it might be a Herman Miller art deco chair.

name a specific wood suitable for a garden chair.? give 5 reason for your choice.

what is the best wood treatment for a victorian beech dining chair? I have just bought 4 beech dining chairs that have been stripped and I need to treat them. I need to know if waxes or oils are best, and which ones-danish, linseed, teak etc. I would wax them but I think it may leave marks on trouser seats (and the legs are heavily turned and it would be really hard work =/) any advice appreciated thanks

How do I remove nail polish from a wood table and a cloth chair?

My Friend just made a chair of unfinished wood. Can I spray paint it?? Please reply soon!! I dont have any primer is it still OK???

Nail Polish Remover on wood chair!!!? I accidently spilled nail polish remover on my wood chair! the paint or finish or what ever it is came off! So now i have a big-ol light spot on my chair! lol How can i get it fixed??? Plz help me!!!! What can i buy to fix it! Or where can i take it! Anything i can buy at Home Depot??? If yes whats the name of the product!!! Plz ppl no stupid comments, i know i messed up...lol I dont need anyone reminding me...lol :) Thanks Everyone!!!!

How do I get wood glue off a wood floor?? Basically my mom was trying to fix a wood chair and ended up getting a big glob of wood glue on the wood floor. How can I get the glue off the floor? Tried a plastic and metal putty knife, they didn't work.

How can I save my wobbling wood chairs from breaking? As a single parent I cannot afford to buy two new chairs right away. Is there a product or something I can do to save or reinforce them making them sturdy for about another two months (especially quickly so we don't have to eat Thanksgiving dinner on the floor). My kids are not able to eat dinner at the same time b/c I only have one good chair left, help this is a nightmare!

What is the chair design called where the chair body is cloth but the arms are curved, wide and thick wood? Do you have a picture of one? I am trying to buy a contemporary copy and don't know what to look for.

I am looking for a way to embelish some worned wooden dining chair? I have this set of 6 very plain light colored wood chairs. They got left outside most of this past summer (in the Arizona sun!) and are now lightly cracked and discolored. Functionnal, but not esthetic. I want to make them look nice, but not sure how. I can sew, altough am no expert, but don't know where to find instructions on how to make cushions. I also thought about painting them, but I am worried it'll look tacky. Any advice?

Crafty ideas on how to fix a chair? So i have this wood chair, i can't throw it out. The back peice has a whole, and its made out of stitched wood fabric. I dont know what to do...

where can i find free pattern on line of old steamer deck lounge chair(made with wood and canvas) thanks?

is it possible to remove the old legs from a wooden chair and replace them with new ones? if so who sells legs I have four old wood chairs that came with a dinning room table. What I would like to do, because of the damage to these chairs, is to remove the legs off of these chairs and replace them with new ones. Is this possible? If so, where would I buy replacement legs? What if we want the old chairs now to be bar height? Does that present more problems than it's worth? Would it be more cost effective to just buy some bar stools?

Whats a chair called when its all wood but the seat is wicker? The frame is wood but the seat is wicker...

crankshaft? we are taking a crankshaft off of a subaru legacy to replace the water pump any hints or tips would be appreciated im sorry i meant the crankshaft PULLY we have to take out the timing belt cover and have trouble with some of the screws and would like to know which direction we need to take the crankshaft pully clockwise or counterclockwise

do i use turpentine or naptha to remove build-up of scum on wood chairs? i used some solvent one other time and i have a project to clean chairs in a resturant that have not been cleaned in years. i also need to do the tables,which aren't as bad. i've tried murphy's soap, degreaser, and misc products to no avail and i need something to get it done easily as i have 200 to do.

Which way to loosen crankshaft pulley bolt on hoda accord ? We are in the middle of trying to replace a failed timing belt on a 1992 Honda Accord and we cannot get the crankshaft pulley bolt off. Please if someone knows does it have reverse threads? We know it is very difficult to get off but we may be turning it the wrong way. Please help if you have suggestions or knowledge. Thank you. ASAP!

What position must a crankshaft be in to remove it? I'm trying to remove a crankshaft from a one cylinder, four stroke, tiny dirt-bike engine. And it doesn't want to come out, I've taken everything else off and I believe that the crankshaft has to be in a certain position to remove. Also, do I need to remove the piston first? and how might I do that? Any suggestions would help.

I am making a canvas chair and i already have all the wood i just need the canvas. Where can i find canvas? canvas for a fold up canvas chair please help give a website or just write me

How do I remove the crankshaft pullley without using the proffestional tool? I have a 1992 Subaru Legacy and I am trying to replace the timming belt myself. I have removed everything but I am stuck in removing the crankshaft pulley. Can anyone please give me some advise on how to remove it since it keeps rotating everytime I try to unlock the nut in the middle of the crankshaft pulley.if there are cheap tools, where can I get it and what is the name of the tool that I should use/buy. Thanks, I preciate your input.

how do i keep the bolts on wood chairs? permittely tighten? I've tighten them several times & they always loosen up. They r outside & i know I have seen/heard/read about something u can put on them that will keep them permit which is FINE by me. Does anyone know? thx

Where is a good place to get cheap replacement chairs for a wood & white kitchen table? My table is the light wood butcher block with white legs & the chairs are wood with white painted legs & back.My chairs are broken but I need replacements at a good price.

Where is the cheapest chair rental in Ohio? I am getting married and want an outdoor wedding. I want the white wooden/ faux wood chairs. But I have a huge family and need about 400. Where is the cheapest place to rent chairs within an hour of Springfield, Ohio??

Should I seal an unfinished wood rocking chair? I have assembled an unfinished wood rocking chair, and sanded it. I'm not sure if I should put a seal on it or not. Why do people put sealer on unfinished wood to begin with? Also, I read something about putting a seal on it, then sandpapering it off. What in the world is that? And is there a certain brand of sealer I should get if I do that? Lastly, I plan on using acrylic paint on the chair. What type of finish should I put on the chair? And how do I maintain/clean then chair? Thanks a BUNCH! My sister is graduating with an early childhood education degree, and as a present, I'm doing a "story time chair" for her in bright, primary colors. Thats why I didn't want to leave it plain.

How would i go about repainting a chair if it already has an old coat of paint on it.? Any websites with pictures? i don't have a sander, instuctions without machinery will be preferable. what grain of sandpaper is good? what type of paint is good to use? will spray paint be okay? this is an inside chair, wood. at the moment it has a hole where you should sit so it needs uphosltering later. thanks for your help!

how do i make my leather chair stop squaking when I brush against my wood desk?

Where can i get wood chairs without paying a fortune? please don't say Walmart i hate that place

Which is better for re-painting a chair? I have a wood side chair that I am going to re-paint and re-cover to use with my desk. It is currently painted black and needs a paint job. I know spray painting is easiest to use, should I sand it first even for spray paint? I want to paint it white, by the way.

How does one refinish (stain) old wood dining room chairs? I have 40 year old dining room chairs that were finished in a antique greenish white (UGLY). I want to restain them in a natural looking wood finish. Do I need to strip the old finish? Do I need to apply a base? HELP!!!!! Thanks much.

What does a crankshaft position sensor do? and what does it look like? Ok, my 2 uncles, my cousin and i are all working on a 2000 Plymouth Voyager with a 2.4 litter engine and its not starting. now one was a pro mechanic and the other two are rebuilding another car so they know what they are doing. now one thing we are questioning is the crankshaft position sensor and the camshaft position sensor. can anyone tell us what they look like and what they do?

How can I hold a crankshaft pulley in order to get the bolt loose? I'm so close to accessing the timing belt on my 88 accord. Last step is to remove the crankshaft pulley but I can't loosen the bolt. Can someone tell me how to hold the pulley tight while trying to unscrew the pulley bolt? this car is an automatic so the crankshaft just spins. How can I lock the crankshaft or pulley in order to get this bolt loose?

How do I install the crankshaft position sensor? I have found out recently through diagnostics that I need to replace the crankshaft position sensor. Has anyone done this before? I don't think I can get to it from the hood. Do I have to get underneath the car? If it helps, I have a 1997 Jeep Grand Cherokee. I have a Chilton, but it doesn't tell me if I have to remove other things to get to it.

What is the purpose of the crankshaft position sensor? I was driving my car yesterday when it all of a sudden came to a complete stop in the middle of the road. I tried to restart it. The car came on but did not start up. The shop told me i had to replace the crankshaft position sensor. What is its purpose?

Is it necessary to remove the crankshaft pulley when replacing a head gasket on a 2.4 DOCH? I have a 1998 Stratus 2.4L with a bad head gasket and was wondering if the crankshaft pully will need to be removed in the process? I am not sure if the timing belt cover is actually behind the crankpully .

Exactly what is the crankshaft ring, and how do I get it off the crankshaft? I need to take the ring off of my old crankshaft and bring it to the mechanic (I can't take the whole crankshaft with me) with the new one, but I'm not sure if it's already been taken off. Is it the gear in the middle of the crankshaft? If it is, how do I get it off?

How do I take out a briggs crankshaft? I need to remove the crankshaft from a 8hp briggs engine so that my friend can add a keyway for me (the engine was made for a generator - no clutch). I can't find anything online so far, and I'm afraid that if I start hacking away I'll compromise the engine's integrity somehow. Any tips would be appreciated.

How much will it cost to replace the crankshaft on my Snapper Lawnmower? It's a Snapper Push-Mower, and I hit a pipe and I think I bent the crankshaft. How much will it cost to repair? I don't think the engine itself is damaged, because I got it to start, it just makes the whole mower shake uncontrollably (so I quickly switched it off). I think it's just a bent crankshaft, which is causing the blade to oscillate instead of turn on center.

How much should a timing belt and front crankshaft seal cost to replace in 1990 ply voyager 3.0v6? Need a front crankshaft seal and timing belt replaced on my 1990 Plymouth Voyager van. It has the Mitsubishi 3.0 v6. What should I expect to pay to have this work done? This is in St. Louis, Mo area. I will supply the parts.

Do crankshaft pulley bolts break during removal very often? I have to remove a crankshaft pulley on a Mazda 626 - 4 cyl. It is so tight that I could not get it to break free, and I am considering using a pneumatic impact wrench, but I am nervous about the bolt twisting off. Is this a legitimate concern, or should I just go for it?

Why my car want start after replacing igntion coil,cam and crankshaft sensors? I have a 1987 Buick Lesabre Custom.I have replaced the starter,ignition coil,cam and crankshaft sensor.Still my car want start.

Is a Crankshaft Position Sensor the same as a Crankshaft Pulse Sensor? I am aware that a Crankshaft Position Sensor is another name for an RPM sensor - I have seen something referred to as a 'Crankshaft Pulse Sensor'. Is this yet another name for the same thing? Thanks.

What is the tangential acceleration of a point on the surface of the crankshaft? A 3.00 cm-diameter crankshaft, rotating at 2900 rpm comes to a halt in 1.50 s. How many revolutions does the crankshaft make as it stops?

Can someone please describe the location of the crankshaft position sensor on a 2003 Nissan Altima? I purchased the sensor after the OBD II equipment stated that there was a problem with it, and replaced a sensor that is exactly the same on the drivers side. I have a feeling that I got the camshaft sensor and not the one with the problem, therefore I need to know where the crankshaft sensor is so I can replace the right one. Dealership confirmed that the part number for both is the same but could not give me a diagram or help on the location... Thanks in advance! 2.5L engine Thanks to everyone that replied... I found and replaced the sensor. o Confirmed that camshaft & crankshaft position sensors are the same. o Crankshaft position sensor is a lot more difficult to replace as it is hidden under the engine and very difficult to access from both under the car & from under the hood. o Be careful with the connector to the sensor. Since you don't see the connector at any time and the clip is different to the camshaft sensor you can break the connector. I broke mine and had to find another connector at the dealership and adapt it by cutting and soldering 3 wires.

How much would it cost to fix/replace a crankshaft in a 2000 Sonata? My check engine light came on, but went off 2 days later. When I was able to get it to a shop for a diagnostic they said it came up as a crankshaft problem and that I should probably have my timing belt replaced when they did it. They quoted me $600. Does that sound about right?

How much does a crankshaft for a fourwheeler cost? I have a 2000 model 325 Polaris Magnum fourstroke. I took it to the shop to see what was wrong with it and they said I needed a new crankshaft. They said it would cost $1100. Another guy told me it wasn't but $250. Does anyone know how much it would really cost just for the part.

How to put in a crankshaft position sensor? i got diagnostics on my nissan altima 2003 4 cylindor with 97,000 miles......and it is either 2 things the crankshaft position sensor OR the computer....hopefully its the crankshaft position sensor cause the computer is EXPENSIVE!!!!!...so i bought the crankshaft postition sensor but i just dont know how to put it in can u plz help me btw the mechanic said im not getting spark or fuel....so its either the CPS or the puter...

Which way do you turn the bolt to take off the crankshaft pulley? I have a 1989 Honda Accord and I need to take the crankshaft pulley bolt off. Does the bolt thread left or right?

I need to know how to line up crankshaft with camshaft for correct timing? Renault Megane 2003. Trying to help a friend short on cash. The crank pulley was in 2 pieces. I was a qualified mechanic many years ago & thought this would be easy. Can't believe with todays technology that by taking off the crank pulley, the crankshaft can turn & camshaft does not. I only hope that valves have not been bent as I used the cranking of the engine to loosen nut on crank pulley. I know I am getting close to being lined up but just want to know correct procedure.

Where can I find the crankshaft for a 93 Isuzu Rodeo? Hi, My engine/motor froze up and when I turn the key, it acts as if it wants to start then it dies. This was caused from driving with no motor oil. Everything inside works but the motor want turn over. I'm not sure where to locate the crankshaft to try to turn it over manually.

will an off balanced crankshaft for my atv cause a crank failure? If a crankshaft for a polaris 250 engine has been impacted, will it throw it off balance and if so will this cause the crankshaft to fail?

What is a crankshaft? & physics alevel question? Have to answer a question on whether a piston in a car engine on a short connecting rod to the crankshaft, executing circular motion, is executing simple harmonic motion or not. What is a crankshaft and is it executing SHM? Thanks for all your help xXx He is most certainly not my dad and i hope he isn't my physics teacher (his name is bob not graham)

How easy is replacing a Crankshaft? I am a highschool student who wants to become a mechanic eventually and im wondering how easy it is to replace a crankshaft on a 1991 Honda civic.

I need help locating the crankshaft position sensor on my 2005 nissan altima. help? I'm trying the replace the crankshaft position sensor, but I cant seem to find it. The only websearches I could find were for the 2003, but the 2005 ws completely redone. Can someone please help me?

What is the difference between a crankshaft and axle? How are they connected I know the crankshaft on a front wheel, front engine drive car is Transverse from left to right, but how does it connect to the axle? I really dont understand this. Im a big time newbie. I would appreciate any help.

How can I drill a bolt hole into my Briggs and Stratton crankshaft? I'm trying to secure a centrifugal clutch onto the crankshaft.

Does any one know where I can find a new forged crankshaft for a 95 eclipse non-turbo 420a motor? I found one? I know my stock crank should be ok but I have made evry thing else forged and want to forge the crankshaft anyway!

How can I tell if my crankshaft is broken? This started a year ago. I came home from a 30 minute drive in my car, put it in park and then the engine started to shake the whole car slightly. It smoothed out and then a "ticking" sound started coming from the engine. I immediately turned the engine off and checked the oil (because it had a bad oil leak which leaked about 1 quart of oil/a week). Apparently the oil leak had gotten worse. It was completely empty after I had filled it up a couple days before this all happened. After sitting for 9 months, I finally got some extra time to look at the engine. my friend told me it could be the valve lifters? So I added more oil, topped it off and started it up. I think the gas went to varnish because it stank and took a while to start. After getting it to start up, I let it idle for about 5 minutes. The "ticking" noise was still there and after 5 minutes, it went to a "clunking" noise. The "ticking" and "clunking" noise were both at the same speed as each other. Is the crankshaft broke? I'm not sure if an '89 Toyota Corolla DX with 193,000 miles is worth putting another engine in. LOL, $1600 for a new engine. thanx for the answers. I'm thinking about rebuilding it once I start going to school soon for my ASE certification.

How do I replace a front (crankshaft) oil seal? How do I replace a front oil seal at the crankshaft on my engine? What is the best way to remove the old seal? How do I press in the new seal? Are there any safe short cuts? What should I be careful of? Before you tell me to have a mechanic or guy do it, you should know I like doing this stuff. I successfully replaced the oil pan gaskets, water pump, alternator, and a half-axle. (I can cook and sew too!) It's time to move ahead. Any tips for a little 5 ft & 102 lb Asian girl with a lot of courage? My Chilton's Manual doesn't say. The make and model doesn't matter here because I am interested in the procedure for removing and replacing the actual seal. The seals are basically the same for all engines and I already know how to get to its location. I took off the timing belt and gear on the crank when I replaced the water pump. It's not big deal. I've done it before. One of the water pump bolts is located behind the gear and its housing. The gear had to come off. It is a front wheel drive but the engine compartment is so big, I could hold a wedding reception under the hood. I don't need to remove the engine. My love ♥♥♥ and sincere thanks to Sam Hill Esquire for your straight-up answer. I appreciate that you didn't assume I was incapable or stupid just because I am a girl. While I love to wear slinky short skirts and strappy Italian high heels, I can also replace a head gasket if needed.

Need a crankshaft for a 1998 Honda Passport? I have looked on the net with not much luck. Looking for a crankshaft for a 1998 Honda Passport, 3.2L engine, 4x4, auto tranny. Can someone please help? Thx in advance.

anyone had pulley crankshaft problems with the mini cooper s ? i own a 2003 cooper s with 80,000km. last week a started to hear a knocking noise coming from the engine. the MINI garage found out that the lower pulley crankshaft was demaged and needs to be replaced. has anyone had this problem? why does it happen? could this problem happen in a 80,000km engine?

where is a crankshaft sensor on a 1997 suzuki sidekick located? we replaced the oxygen sensor today.we went and put it back on the machine and it says our crankshaft sensor is out.what does it do and what happens if we dont replace it.

why are my crankshaft and camshaft sensors not getting a connection? i have a 2003 olds alero V6 3.4L. my car dealership told me that i have a hard time starting it because the camshaft and crankshaft sensors are not getting a connection so i ahd them replaced and it did not take care of the problem. i have a hard time getting it started mainly when it is warmed up or is warm outside. it will crank & crank and then all of a sudden start. what else would be causing them not to get a connection?

how is the crankshaft lubricated on an aprilia habana? i have already asked about the transmission oil and yes it is dry clutched but how is the crankshaft lubricated?

Which direction the crankshaft center bolt shall be turn to loose? I try to remove the crankshaft pulley on my 1996 Mercury Villager for replacing the timing belt. I read many tips on the web how to remove it. But no one (nor the repair manual) tells which direction to turn. From an engineering perspective, I would think it shall turn counter-clock wise (facing the wheel) to tight. Could anyone tell me which direction to turn to loose the bolt? Thanks in advance.

I just cannot unscrew the crankshaft pulley bolt to remove it. What am I doing wrong? My car is a honda accord, 1997cc, year of make, 1994. I have the special tool for holding the crankshaft pulley. Still I just cannot unscrew the pulley bolt even though the crankshaft pulley is stationary. I am using the right size deep nose socket wrench, i.e., 19mm. socket. Help please.

where is the crankshaft sensor on a 05 explorer? i need to find the location of the crankshaft sensor on a 2005 ford explorer limited.

Does my 96 Caravan have a crankshaft position sensor? I have a 96 Dodge Caravan with the 3.0L v6 engine. Autozone.com lists an independent crankshaft sensor for it. Other people say it is integrated with the distributor. The autozone guide says that it is the CAMshaft sensor integrated. So, what is the actual situation with this? And if it is independent, where is it located?

trying to locate the crankshaft censor in an automatic 1991 grand prix? my car acts like it dont get gas it keeps dying out at stops and on hills. i had it looked at and they said it had a short in the crankshaft manifold.

What is the metal plate behind the lower timing gear the part that spins thur the crankshaft position sensor? My timing belt went and it bent a thin piece of metal that is located behind the lower timing gear, it is round with two fin like pieces that pass thur the crankshaft position sensor. Can anyone tell me what the thin metal part is called?

can anyone help us find a camshaft and crankshaft drive? we are having no luck looking for car parts.we need a camshaft and crankshaft drive cog to suit a r2 diesel motor for ford courier,mazda,econovan etc.anywhere in australia.

How to remove crankshaft pulley from ford contour? Ok so I got the bolt out, but I can't seem to get the pulley off. Im not sure if it is just suppose to pop off. I figured it was wedged on and I will possibly need a puller. Im not sure any helpful hints would be nice.

Where the hell is the crankshaft and camshaft sensor located in a 97 maxima? my car is not starting and the alternator, battery and fuel pump are good.

What is the name of the airplane engine where the crankshaft stays stationery and the crankshaft rotates?