Seat Unit

How many crankshafts in an internal combustion engin? How many crankshafts in an internal engine?

How do rotary airplane engines work? Are there different crankshafts for different cylinders? How many rod journals are on a twelve cylinder engine?

How long do crankshafts last if they do alot of engines work?

How are crankshafts made or forged? Can anyone explain me in detail?

How does the motion of the moving pistons and crankshafts in an engine actually move the wheels of a car?

what are the methods used commanly to detect cracks in Heavy duty crankshafts?

how many crankshafts are in an internal combustion engine?

how are crankshafts designed? How are crankshafts used for reciprocating gas compressors designed? What consideration is given to the material of construction ? How are the peak running RPM calculated? How is the dynamic balancing done?

I need better Cam and crankshafts? i would like to get a better camshafts and crankshaft(gears,and such for em too), for a 1998 2.4 L Pontiac Sunfire(AT) but i can't find them anywhere.

How to install a crankshaft sensor in a 1993 Olds Cutlass Cierra? Have already installed an ignition module, car will not start only sometimes, now trying to install a crankshaft sensor, does anyone have any advise? Where can I go to get instructions? P. S. Car is a 3.3Liter V6 Received 3 answers, but no one has still told me where to get instructions or how to do it.

What position must a crankshaft be in to remove it? I'm trying to remove a crankshaft from a one cylinder, four stroke, tiny dirt-bike engine. And it doesn't want to come out, I've taken everything else off and I believe that the crankshaft has to be in a certain position to remove. Also, do I need to remove the piston first? and how might I do that? Any suggestions would help.

How do I remove the crankshaft pullley without using the proffestional tool? I have a 1992 Subaru Legacy and I am trying to replace the timming belt myself. I have removed everything but I am stuck in removing the crankshaft pulley. Can anyone please give me some advise on how to remove it since it keeps rotating everytime I try to unlock the nut in the middle of the crankshaft pulley.if there are cheap tools, where can I get it and what is the name of the tool that I should use/buy. Thanks, I preciate your input.

What does a crankshaft position sensor do? and what does it look like? Ok, my 2 uncles, my cousin and i are all working on a 2000 Plymouth Voyager with a 2.4 litter engine and its not starting. now one was a pro mechanic and the other two are rebuilding another car so they know what they are doing. now one thing we are questioning is the crankshaft position sensor and the camshaft position sensor. can anyone tell us what they look like and what they do?

Which way to loosen crankshaft pulley bolt on hoda accord ? We are in the middle of trying to replace a failed timing belt on a 1992 Honda Accord and we cannot get the crankshaft pulley bolt off. Please if someone knows does it have reverse threads? We know it is very difficult to get off but we may be turning it the wrong way. Please help if you have suggestions or knowledge. Thank you. ASAP!

How can I hold a crankshaft pulley in order to get the bolt loose? I'm so close to accessing the timing belt on my 88 accord. Last step is to remove the crankshaft pulley but I can't loosen the bolt. Can someone tell me how to hold the pulley tight while trying to unscrew the pulley bolt? this car is an automatic so the crankshaft just spins. How can I lock the crankshaft or pulley in order to get this bolt loose?

How do I install the crankshaft position sensor? I have found out recently through diagnostics that I need to replace the crankshaft position sensor. Has anyone done this before? I don't think I can get to it from the hood. Do I have to get underneath the car? If it helps, I have a 1997 Jeep Grand Cherokee. I have a Chilton, but it doesn't tell me if I have to remove other things to get to it.

What is the purpose of the crankshaft position sensor? I was driving my car yesterday when it all of a sudden came to a complete stop in the middle of the road. I tried to restart it. The car came on but did not start up. The shop told me i had to replace the crankshaft position sensor. What is its purpose?

Is it necessary to remove the crankshaft pulley when replacing a head gasket on a 2.4 DOCH? I have a 1998 Stratus 2.4L with a bad head gasket and was wondering if the crankshaft pully will need to be removed in the process? I am not sure if the timing belt cover is actually behind the crankpully .

Exactly what is the crankshaft ring, and how do I get it off the crankshaft? I need to take the ring off of my old crankshaft and bring it to the mechanic (I can't take the whole crankshaft with me) with the new one, but I'm not sure if it's already been taken off. Is it the gear in the middle of the crankshaft? If it is, how do I get it off?

How do I take out a briggs crankshaft? I need to remove the crankshaft from a 8hp briggs engine so that my friend can add a keyway for me (the engine was made for a generator - no clutch). I can't find anything online so far, and I'm afraid that if I start hacking away I'll compromise the engine's integrity somehow. Any tips would be appreciated.

How much should a timing belt and front crankshaft seal cost to replace in 1990 ply voyager 3.0v6? Need a front crankshaft seal and timing belt replaced on my 1990 Plymouth Voyager van. It has the Mitsubishi 3.0 v6. What should I expect to pay to have this work done? This is in St. Louis, Mo area. I will supply the parts.

How much will it cost to replace the crankshaft on my Snapper Lawnmower? It's a Snapper Push-Mower, and I hit a pipe and I think I bent the crankshaft. How much will it cost to repair? I don't think the engine itself is damaged, because I got it to start, it just makes the whole mower shake uncontrollably (so I quickly switched it off). I think it's just a bent crankshaft, which is causing the blade to oscillate instead of turn on center.

Is it possible to straighten a bent crankshaft on my Toro Model 20037? My neighbor was always mowing part of my lawn with an old junk mower that left a crappy cut behind it. So I pigheadidly pounded a 2" steel rod to mark my property....I had mowed by this thing 50 times. This time I hit it.

How to remove crankshaft pulley from ford contour? Ok so I got the bolt out, but I can't seem to get the pulley off. Im not sure if it is just suppose to pop off. I figured it was wedged on and I will possibly need a puller. Im not sure any helpful hints would be nice.

Do crankshaft pulley bolts break during removal very often? I have to remove a crankshaft pulley on a Mazda 626 - 4 cyl. It is so tight that I could not get it to break free, and I am considering using a pneumatic impact wrench, but I am nervous about the bolt twisting off. Is this a legitimate concern, or should I just go for it?

Why my car want start after replacing igntion coil,cam and crankshaft sensors? I have a 1987 Buick Lesabre Custom.I have replaced the starter,ignition coil,cam and crankshaft sensor.Still my car want start.

How engine power is transmitted to crankshaft? I would like to know how engine power is transmitted to crankshaft in two stroke cycle and four stroke cycle. Where can I find about it on the web for detail? I would like to get the detail answer if possible.

Where the hell is the crankshaft and camshaft sensor located in a 97 maxima? my car is not starting and the alternator, battery and fuel pump are good.

how do you put a crankshaft sensor into a 1992 buick lesabre? Do you need a special tool to put the sensor in after you get the old one out? Do you need a special tool to put the sensor in after you remove the harmonic balancer.I know you have to remove the pulley,but what I want to know is if the sensor needs to have a special tool.To line it up correctly so that it connects.

Is a Crankshaft Position Sensor the same as a Crankshaft Pulse Sensor? I am aware that a Crankshaft Position Sensor is another name for an RPM sensor - I have seen something referred to as a 'Crankshaft Pulse Sensor'. Is this yet another name for the same thing? Thanks.

What is the cheapest crankshaft head and how do you fix a cracked lax head? I recently bought a Crankshaft from my friend for $7, but i dont have a head to put on it. What is the cheapest head that fits on a crankshaft 10 degree. I also cracked my blade head so i was wondering how to fix it. im talking about lacrosse stuff not mechanics

What is the tangential acceleration of a point on the surface of the crankshaft? A 3.00 cm-diameter crankshaft, rotating at 2900 rpm comes to a halt in 1.50 s. How many revolutions does the crankshaft make as it stops?

What is the name of the airplane engine where the crankshaft stays stationery and the crankshaft rotates?

How do I change out my crankshaft position sensor? I have a 97Jeep Grand Cherokee and I have figured out by codes that I have to change it out. I can get to the part but I cannot figure out how to loosen the bolt that holds the sensor in place. It is stuck fast on there. Any ideas on how to get that bolt loose? Also my hand almost seems too big to even reach it all the way

What is the difference between a crankshaft seal and a main seal? Are they the same thing or no? Yes I know that I need to know if the front crank seal and rear crank seal is just another name for a front main seal and rear main seal Ok I think I have it. The front crank seal is just called the crank seal and the rear crank seal is just called the rear main seal, does this sound right?

Can someone please describe the location of the crankshaft position sensor on a 2003 Nissan Altima? I purchased the sensor after the OBD II equipment stated that there was a problem with it, and replaced a sensor that is exactly the same on the drivers side. I have a feeling that I got the camshaft sensor and not the one with the problem, therefore I need to know where the crankshaft sensor is so I can replace the right one. Dealership confirmed that the part number for both is the same but could not give me a diagram or help on the location... Thanks in advance! 2.5L engine Thanks to everyone that replied... I found and replaced the sensor. o Confirmed that camshaft & crankshaft position sensors are the same. o Crankshaft position sensor is a lot more difficult to replace as it is hidden under the engine and very difficult to access from both under the car & from under the hood. o Be careful with the connector to the sensor. Since you don't see the connector at any time and the clip is different to the camshaft sensor you can break the connector. I broke mine and had to find another connector at the dealership and adapt it by cutting and soldering 3 wires.

How much would it cost to fix/replace a crankshaft in a 2000 Sonata? My check engine light came on, but went off 2 days later. When I was able to get it to a shop for a diagnostic they said it came up as a crankshaft problem and that I should probably have my timing belt replaced when they did it. They quoted me $600. Does that sound about right?

How do I locate and replace the crankshaft positioning sensor on my 1998 Firebird? I know the sensor is bad, but I don't know where it is or if there are any precautions when replacing it. Once it is located, can I just put a new one in, or do I have to make any other adjustments to the vehicle?

What process is needed to take off a crankshaft positioning sensor on a 93 sunbird? I disconnected the wiring and tried to follow the wire to the block but was unable to find where it gets bolted to. This particular car is a 2L with an overhead cam if that will help. The sensor looks like it is located under the water pump but i am not sure if i should remove that to get at that sensor.

Is there another way to pull theVW 1600 crankshaft gear,without buying that expensive tool to do it? Without damaging the crank.

How much does a crankshaft for a fourwheeler cost? I have a 2000 model 325 Polaris Magnum fourstroke. I took it to the shop to see what was wrong with it and they said I needed a new crankshaft. They said it would cost $1100. Another guy told me it wasn't but $250. Does anyone know how much it would really cost just for the part.

I need better Cam and crankshafts? i would like to get a better camshafts and crankshaft(gears,and such for em too), for a 2002 1.8 L Toyota Celica GTS(MT) but i can't find them anywhere. any advice

Where is my crankshaft position sensor located? I have a 1995 Chevy S-10 with a 2.2 and a 5 speed. I have it in a shop right now because they replaced my fuel pump, then it broke down again when I picked it up and they said it must be the ignition module. That didn't fix it either. I am ASE certified and all of that good stuff, but my brother said it could be the cranks sensor causing the stalling/hard starting/no starting. I will get my money back from the fuel pump repair, but I want to pick up the truck because I told the shop I can throw parts at it myself if I wanted to keep doing things their way. I just want to test the CPS, but is it behind the harmonic balancer or somewhere else? For little minded individual, all of the ASE certs in the world do not mean you can pinpoint the specific location of a specific part on a specific vehicle. ASE certified isn't just for techinicans even though I was one for 9 years. I am required to be a Master ASE Certified individual for my warranty claims job. Your very little mind tried to be funny.

Where can I find a new wiring harness for the crankshaft sensor on a 1995 dodge neon? The wires to my crankshaft sensor have melted together all the way up the harness I need to find a new wiring harness and exactly how difficult of a job is it to replace the sensor and wiring. The computer read this as my start-up problem.

How to remove the crankshaft Pulley on a Vauxhall Vectra? The problem here is that the four bolts that hold it have a peculiar head. A 8mm ring spanner approxiamately fits it but not accurately enough. Does anyone know what kind of head it is and where one gets the spanner to fit it.

How to put in a crankshaft position sensor? i got diagnostics on my nissan altima 2003 4 cylindor with 97,000 miles......and it is either 2 things the crankshaft position sensor OR the computer....hopefully its the crankshaft position sensor cause the computer is EXPENSIVE!!!!!...so i bought the crankshaft postition sensor but i just dont know how to put it in can u plz help me btw the mechanic said im not getting spark or fuel....so its either the CPS or the puter...

Which way do you turn the bolt to take off the crankshaft pulley? I have a 1989 Honda Accord and I need to take the crankshaft pulley bolt off. Does the bolt thread left or right?

How do i find the correct firing order on the crankshaft? How do i find the correct firing order on the crankshaft and timing mark right after the removal of the timing belt. The firing order of 4 cylinder engine is 1-3-4-2 1996 Toyota Camery How do i find the correct firing order on the crankshaft and timing mark right after the removal of the timing belt. By mistake after i alligned the number one cylindar. I took the cranshaft pulley out. The crankshaft moved. How can i realigned the firing order The firing order of 4 cylindar engine is 1-3-4-2 1996 toyota camery

What if the motor has high compression and it is not easilly turn by the crankshaft bolt? Do you have to purchase a gauge that utulizes the spark plug port to read the compression while bumping the motor over with the starter?

How do I remove the crankshaft sensor on a 1998 Dodge Ram with a 318 and 5 speed transmission? Where is it located on the bell housing? L/R side Any tricks?

How can I find a crankshaft position sensor on a 05 stratus? It's an 05 Dodge Stratus and I dont know much about cars, can someone please help me find it. A diagram or a way to find it would be amazing any information at all would help tons, I hear its a common problem with Dodges but I cant find anything online clearly saying where to find it please help!!!

How do you remove the bolt from the crankshaft pulley on a Nissan xterra? Am using a breaker bar, socket, and strap wrench. The bolt is real tight and wont turn. (trying to replace the timing belt)

I need to know how to line up crankshaft with camshaft for correct timing? Renault Megane 2003. Trying to help a friend short on cash. The crank pulley was in 2 pieces. I was a qualified mechanic many years ago & thought this would be easy. Can't believe with todays technology that by taking off the crank pulley, the crankshaft can turn & camshaft does not. I only hope that valves have not been bent as I used the cranking of the engine to loosen nut on crank pulley. I know I am getting close to being lined up but just want to know correct procedure.

On a 2003 Taurus, where is the crankshaft position sensor and are there any tricks to changing it out? By "tricks" I mean anything other than removing the original and installing the new. Thanks!

How do I replace the crankshaft seal on my Murray lawn mower? My mower is leaking oil at the bottom where the shaft comes out of the engine, just above the blade.

is the crankshaft bolt of a 91 geo storm a left or right hand thread? The center bolt of the harmonic balancer is real tough to get off. we tried just about everything, and it still wont budge.